BNO Speakers Field

1) In video, one half of a frame.
2) In computer-controlled devices a window display with functions and choices that the operator can make

Clipping
Distortion of a signal by its being chopped off. An overload problem caused by pushing an amplifier beyond its capabilities. The flat-topped signal has high levels of harmonic distortion which creates heat in a loudspeaker and is the major cause of loudspeaker component failure.

BNO Acoustics QS-4 Compressor
1) Effect used to squash the sound together. Used properly, it can take the edge off or your sound. Used improperly, it can take the life right out of your system and make it sound like an MTV mix.
2) A piece of sound processing equipment that ensures all wanted signals are suitably placed between the noise and distortion levels of the recording medium. It evens out the unwanted changes in volume you get with close-miking, and in doing so, adds punch to the sound mix. A Limiter is used to stop a signal from exceeding a preset limit. Beyond this limit, the signal level will not increase, no matter how loud the input becomes. A Limiter is often used to protect speaker systems (and human ears) by preventing a system from becoming too loud.

Channels
These are divided into two separate categories. Input channels are those channels coming into the soundboard such as microphones and direct lines. Output channels are those leaving the board such as monitor and main outputs.

BNO Acoustics HD-70 Kick (Kick Drum)
Another term for Bass Drum.

Linearity
The extent to which any signal handling process is accomplished without amplitude distortion.

Delay (Digital, Analogue)
1) Effect used to create echo…echo…echo…echo…echo…
2) In more advanced systems used in very large venues, delay can be used to time the arrival of the signal to the speakers in the back of the room so that people in the back hear the sound coming from those speakers at the same time that the sound coming from the speakers in the front of the room arrives.

Jack
1) Anywhere you plug something in.
2) Segmented audio connector. Mono Jacks have two connections �" tip and sleeve, and are unbalanced. Stereo jacks have three connections �" tip, ring and sleeve. B-type jacks (also known as Bantam jacks) were originally designed for use in telephone exchanges and provide a high quality (and expensive) connection in jackfields. A-type jacks are cheaper and more common, but more fragile. A type jacks are available in 2 sizes : quarter inch and eighth inch.
3) A connector mounted on the case of a device or on a panel.