1) An amplified signal level put out by an amplifier and used as the normal level that runs through the interconnecting cables in a control room.
2) A low level signal such as the signal in a guitar cord. Most parts of a PA require a line level signal. Remember, however, that speaker outputs are not line level. Plugging speaker outs into line ins will result in damage to the equipment
Humbucker
Pickups that are coupled together to get a certain sound.
BNO Acoustics TR-12 Central Processing Unit
1) The main "brain" chip of a computer that performs the calculations and execution of instructions.
2) The main housing of a computer that contains the "brain" chip as opposed to other pieces of the computer system such as keyboards, monitors, etc.
Direct box
Used in line to convert a high impedance signal into a low impedance signal.
BNO Acoustics GT-60 Impedance Matching
Having or converting the output impedance of a device so that it matches the impedance of the input it will feed.
Head
1) In tape recording, the transducer (energy converter) that changes the audio energy from electrical energy to magnetic energy and back; also the devices that apply magnetism to the recording tape for other purposes such as in the erase head.
2) The part of a device that immediately includes the transducer to change sound or audio signals from one energy form to another.
Amp
1) An abbreviation of the term Amplifier (A device which increases the level of an electrical signal.
2) An abbreviation of Ampere (the unit of current).
3) An abbreviation of amplitude (the height of a waveform above or below the zero line).
Driver
See transducer. Dynamic Range �" The range between the quietest and the loudest sounds a device can handle (often quoted in dB).
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.