Any output that sends out a line level signal, such as the output of a console that feeds a recorder.
Bass
1) The lower range of audio frequencies up to approximately 250 Hz.
2) Short for Bass Guitar.
3) Lower end of the musical scale. In acoustics, the range (below about 200 Hz) in which there are difficulties, principally in the reproduction of sound, due to the large wavelengths involved.
4) The lower frequencies.
5) On the soundboard this should refer to the bass guitar channel, not the bass drum.
6) The lowest frequencies of sound. Bi-Amplification uses an electronic crossover or line-level amplifiers for the high and low frequency loudspeaker drivers.
BNO Acoustics GK-3 Crossover Frequency
1) The frequency that is the outer limit of one of the bands of a crossover.
2) In the Lexicon 480L delay/reverberation effects unit, the frequency at which the bass frequency reverb time is in effect rather than the mid frequency reverb time.
Level
The amount of signal strength; the amplitude, especially the average amplitude.
BNO Acoustics SQ-9 Grouping
1) Controlling the gain of several individual channels with a Group Fader.
2) The mixing together of several individual audio signals to send a mixed signal out of the console to record a track on a multitrack tape machine.
IC
Abbreviation of Integrated Circuit (A miniature circuit of many components that is in small, sealed housing with prongs to connect it into equipment).
Editing
1) Changing the sequence of a recording by cutting the recording tape and putting the pieces together in the new sequence with splicing tape.
2) Punching in and then punching out on one or more tracks of a multitrack tape recorder to replace previously recorded performances.
3) Changing the sequence of a digital recording's playback by computer program.
Byte
A grouping of eight information bits.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.