Several jacks that are wired so that each connection is wired to the corresponding connection of other jacks.
Rewind
Movement of the tape quickly from the take up reel to the supply reel (the direction opposite of play).
RF Abbreviation for the term Radio Frequencies (frequencies higher than 20,000 Hz � usually above 100 kHz).
Flat
1) Lower in musical pitch.
2) A slang term used to describe the sensitivity to frequency of a microphone, amplifier, etc., as being even at all frequencies, usually within 2 dB.
3) Refers to the frequencies on the EQ when they are arranged in centred neutral positions.
M
1) This is the Greek letter "mu", which is actually a forerunner of the English "M", however, the lower-case "u" is often used in place of it because of it's similar appearance.
2) This symbol is used for micro- (one millionth).
3) m s means two microseconds which is 2/1,000,000 of a second.
Condenser Microphone
A microphone which converts sound pressure changes into changes of capacitance. The capacitance changes are then converted into electrical voltage variations (an audio signal).
BNO Speakers: Chorusing
1) A term meaning the same thing as Chorus (Definition 3 or 4).
2) In some delay effects devices, a term used to mean the term Depth (the amount of change in the controlled signal by the control signal).
Reverberation
The persistence of a sound after the source stops emitting it, caused by many discrete echoes arriving at the ear so closely spaced in time that the ear cannot separate them.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.