A connection in a coil of a transformer.
BNO Acoustics SQ-9: Bank
1) A collection of sound patches (data as to the sequence and operating parameters of the synthesizer generators and modifiers) in memory.
2) A group of sound modules as a unit.
BNO Acoustics YM-44: Notch Filter
A device that rejects signals that have frequencies within a narrow band of audio frequencies and passes all other signals.
Room Sound
The ambience of a room including the reverberation and background noise.
Sibilance
Energy from a voice centred around 7 kHz caused by pronouncing "s", "sh" or "ch" sounds.
BNO Acoustics QT-5: Input Overload
Sending too high of a signal level into a device so that the first amplifier of the device overloads.
BNO Acoustics XR-90: Shotgun Microphone
A microphone with a long line filter (a tube that acoustically cancels sound arriving from the side) to make the microphone pick up much better in one direction than in any other direction.
Wednesday, October 30, 2019
Wednesday, October 23, 2019
BNO Acoustics XR-90: Phase Addition
The energy of one waveform increasing the energy of another waveform because the two waveforms have similar phase relationships.
BNO Acoustics Speakers: Non-Directional
Used with microphones to mean the same thing as the term Omni-Directional (picking up from all directions).
Post
1) A position of a send control (or other control) after the main channel fader.
2) Short for the term Post-Production.
BNO Acoustics SQ-9: Precedence Effect
A factor in human hearing where delay has a much bigger effect on the human perception of the location of the sound source than level does.
BNO Acoustics QT-5: ST
An abbreviation used by an engineer for noting a Safety Take, indicating a take done after a take of acceptable quality had been recorded.
Instrument Out Direct
Feeding the output of an electric instrument (like an electric guitar) to the recording console or tape recorder without using a microphone.
Mixdown (Mix Down)
Combining the signals from the tracks of a multitrack tape onto a master tape; reverberation/other effects may be also added.
BNO Acoustics Speakers: Non-Directional
Used with microphones to mean the same thing as the term Omni-Directional (picking up from all directions).
Post
1) A position of a send control (or other control) after the main channel fader.
2) Short for the term Post-Production.
BNO Acoustics SQ-9: Precedence Effect
A factor in human hearing where delay has a much bigger effect on the human perception of the location of the sound source than level does.
BNO Acoustics QT-5: ST
An abbreviation used by an engineer for noting a Safety Take, indicating a take done after a take of acceptable quality had been recorded.
Instrument Out Direct
Feeding the output of an electric instrument (like an electric guitar) to the recording console or tape recorder without using a microphone.
Mixdown (Mix Down)
Combining the signals from the tracks of a multitrack tape onto a master tape; reverberation/other effects may be also added.
Tuesday, October 22, 2019
BNO Acoustics Speakers: AC
1) Abbreviation for alternating current.
2) An abbreviation of the term Alternating Current (electric current which flows back and forth in a circuit; all studio signals running through audio lines are AC).
Signal Flow
The path that a signal moves through an audio system such as a console.
Barrier Micing
A method of placing the head of a microphone as close as possible to a reflective surface, preventing phase cancellation.
Separation
A term used to describe the pick up of a desired signal compared to the pick up of an undesired signal.
BNO Acoustics XV-16: Trim
1) Same as "Trim Control" (see below).
2) To make a small adjustment to any control.
Open Circuit
1) Having a break in a conductor or, for another reason, not having a complete path for electrons to flow.
2) Said of an amplifier, having nothing feeding the input.
Speaker Out
A high power signal leaves the power amp through this jack on it's way to the speaker.
2) An abbreviation of the term Alternating Current (electric current which flows back and forth in a circuit; all studio signals running through audio lines are AC).
Signal Flow
The path that a signal moves through an audio system such as a console.
Barrier Micing
A method of placing the head of a microphone as close as possible to a reflective surface, preventing phase cancellation.
Separation
A term used to describe the pick up of a desired signal compared to the pick up of an undesired signal.
BNO Acoustics XV-16: Trim
1) Same as "Trim Control" (see below).
2) To make a small adjustment to any control.
Open Circuit
1) Having a break in a conductor or, for another reason, not having a complete path for electrons to flow.
2) Said of an amplifier, having nothing feeding the input.
Speaker Out
A high power signal leaves the power amp through this jack on it's way to the speaker.
Monday, October 21, 2019
BNO Acoustics QS-4: Midrange
The middle frequencies where the ear is the most sensitive.
Room Tone
The background noise in a room without people speaking or music playing.
MIDI Patch Bay
A device that has several MIDI inputs and outputs and allows any input to be routed to any output.
BNO Acoustics BP-40: Super Cardioid Pattern
A microphone pattern with maximum sensitivity on axis and least sensitivity approximately 150 degrees off axis.
Attack
The rate the sound begins and increases in volume.
Harmonics
Integer multiples of a fundamental frequency, the fundamental itself being the first harmonic, its first overtone the second harmonic, etc. Attributing to instruments, voices, etc. their distinctive timbre.
Torque-Limit Switch
A switch that reduces torque (rotational force) to the reel motors for small reels and allows full torque for larger reels.
Room Tone
The background noise in a room without people speaking or music playing.
MIDI Patch Bay
A device that has several MIDI inputs and outputs and allows any input to be routed to any output.
BNO Acoustics BP-40: Super Cardioid Pattern
A microphone pattern with maximum sensitivity on axis and least sensitivity approximately 150 degrees off axis.
Attack
The rate the sound begins and increases in volume.
Harmonics
Integer multiples of a fundamental frequency, the fundamental itself being the first harmonic, its first overtone the second harmonic, etc. Attributing to instruments, voices, etc. their distinctive timbre.
Torque-Limit Switch
A switch that reduces torque (rotational force) to the reel motors for small reels and allows full torque for larger reels.
Sunday, October 20, 2019
BNO Acoustics QS-4: Near Field
The area up to one foot from the sound source.
Peak Responding
Recognizing and responding to (or indicating) the peak value rather than the average or effective value.
BNO Acoustics 6k-52: Polar Pattern
1) For microphones, a graphic display of the audio output levels caused by sound waves arriving at the mic from different directions.
2) In speakers, a graphic display of the speaker's dispersion.
BNO Acoustics SQ-9: Amplifier (Power amp, Head)
It's the part of the sound system that actually magnifies or "amplifies" the sound. In other words, it makes stuff louder.
Record
The switch, which activates the electronics of the tape, machine to record.
Spot Erase
The action or function of erasing a very small segment of one track (or several tracks) of a multitrack recording by disengaging the normal tape drive system while the machine is in record; the engineer moves the tape by hand or by using a shuttle control.
BNO Acoustics HD-70: Resistor
1) A device used in a circuit primarily to provide resistance.
2) A device which opposes the flow of electrical current and does so evenly at all frequencies.
Peak Responding
Recognizing and responding to (or indicating) the peak value rather than the average or effective value.
BNO Acoustics 6k-52: Polar Pattern
1) For microphones, a graphic display of the audio output levels caused by sound waves arriving at the mic from different directions.
2) In speakers, a graphic display of the speaker's dispersion.
BNO Acoustics SQ-9: Amplifier (Power amp, Head)
It's the part of the sound system that actually magnifies or "amplifies" the sound. In other words, it makes stuff louder.
Record
The switch, which activates the electronics of the tape, machine to record.
Spot Erase
The action or function of erasing a very small segment of one track (or several tracks) of a multitrack recording by disengaging the normal tape drive system while the machine is in record; the engineer moves the tape by hand or by using a shuttle control.
BNO Acoustics HD-70: Resistor
1) A device used in a circuit primarily to provide resistance.
2) A device which opposes the flow of electrical current and does so evenly at all frequencies.
Saturday, October 19, 2019
BNO Acoustics TR-12: Switchable Pattern
Microphone A microphone which will have more than one directional pattern depending upon the position of the pattern switch.
Notch
A narrow band of audio frequencies.
Variable-D
A patented invention (and trademark) of Electrovoice where several port are put down the case of the microphone. The ports are less and less sensitive to high frequencies as they are further away from the diaphragm, reducing proximity effect.
Binary
A numbering system based on two. In binary there are two symbols used ("l" and "0").
BNO Acoustics Speakers: Mic Pad
A device that reduces the level of the signal and is placed just before a microphone preamplifier to prevent overload of the preamplifier.
BNO Acoustics QT-5: Attenuator (Pot)
The electronic dohickey under the knobs that increases or reduces the strength of the signal running through it. When these get old and dirty, they can make popping noises or rumbles in your PA (As in "my pots are dirty").
Assign Tochoose to which place an output is going to be sent.
Operational Amplifier
An amplifying circuit used in most audio devices.
Notch
A narrow band of audio frequencies.
Variable-D
A patented invention (and trademark) of Electrovoice where several port are put down the case of the microphone. The ports are less and less sensitive to high frequencies as they are further away from the diaphragm, reducing proximity effect.
Binary
A numbering system based on two. In binary there are two symbols used ("l" and "0").
BNO Acoustics Speakers: Mic Pad
A device that reduces the level of the signal and is placed just before a microphone preamplifier to prevent overload of the preamplifier.
BNO Acoustics QT-5: Attenuator (Pot)
The electronic dohickey under the knobs that increases or reduces the strength of the signal running through it. When these get old and dirty, they can make popping noises or rumbles in your PA (As in "my pots are dirty").
Assign Tochoose to which place an output is going to be sent.
Operational Amplifier
An amplifying circuit used in most audio devices.
Monday, October 14, 2019
BNO Acoustics TR-12: Truncation
The editing of a sample playback so that just the desired portion of the sample is played by moving the start and end point of the sample playback.
Voltage
The electrical force pushing electrons to obtain electrical current.
Atom
The smallest particle which makes up a specific substance. It's composed of a center around which electrons revolve.
Regulated Power Supply
A device to supply power to electronic equipment whose output voltage will not fluctuate when more equipment is turned on, or if there is a change in voltage of the power line.
Integrated Circuit (IC)
A miniature circuit of many components in a small, sealed housing with prongs to connect it into equipment.
Width
Another term for Depth (the amount of change in the controlled signal by the control signal).
Feedback
1) The delayed signal sent back to the input of a delay line, used in repeat-echo effects.
2) The pickup of the signal out of a channel by its input or the howling sound that this produces.
3) In an amplifier, the phase reversed output signal sent back to its input, reducing gain but also distortion and noise.
4) This occurs when the sound coming out of the speakers goes back into the microphones, then back out the speakers, then back into the mics�and so on. This can build very quickly to a point where everyone in the room is holding their ears and screaming at you. It can also cause damage to the PA.
Voltage
The electrical force pushing electrons to obtain electrical current.
Atom
The smallest particle which makes up a specific substance. It's composed of a center around which electrons revolve.
Regulated Power Supply
A device to supply power to electronic equipment whose output voltage will not fluctuate when more equipment is turned on, or if there is a change in voltage of the power line.
Integrated Circuit (IC)
A miniature circuit of many components in a small, sealed housing with prongs to connect it into equipment.
Width
Another term for Depth (the amount of change in the controlled signal by the control signal).
Feedback
1) The delayed signal sent back to the input of a delay line, used in repeat-echo effects.
2) The pickup of the signal out of a channel by its input or the howling sound that this produces.
3) In an amplifier, the phase reversed output signal sent back to its input, reducing gain but also distortion and noise.
4) This occurs when the sound coming out of the speakers goes back into the microphones, then back out the speakers, then back into the mics�and so on. This can build very quickly to a point where everyone in the room is holding their ears and screaming at you. It can also cause damage to the PA.
Subscribe to:
Posts (Atom)